Strong Neodymium Pot Magnets – Part No.: HSPNS-F400
Diameter D – 116 mm
Height H – 20 mm
Pull power: 400 kg
Weight: 1.58 kg
The thread of bolts: M10
One-way Eyebolts included.
With galvanized body
Magnet material: NdFeB
Magnet shape: Pot, cylinder, ring
Magnet coating: Nickel (ni-cu-ni)
Max. work temperature: +80℃
Diameter D – 116 mm
Height H – 20 mm
Pull power: 400 kg
Weight: 1.58 kg
The thread of bolts: M10
One-way Eyebolts included.
With galvanized body
Magnet material: NdFeB
Magnet shape: Pot, cylinder, ring
Magnet coating: Nickel (ni-cu-ni)
Max. work temperature: +80℃
Neodymium Pot magnet with Threaded Stud. Complete with EYEBOLT.
The strong Neodymium magnet is encased in steel which concentrates the magnetic pulling power to the front face.
Please note this pull figure can only be achieved when using the magnet on a flat piece of steel around 25mm thick. When used on thin sections most of the magnetic field will pass through the item and not grip anything. The pull on thin sections will therefore be much less than on thicker items.
These magnets are approximately 10 times stronger than traditional ‘red’ magnets.
The strong Neodymium magnet is encased in steel which concentrates the magnetic pulling power to the front face.
Please note this pull figure can only be achieved when using the magnet on a flat piece of steel around 25mm thick. When used on thin sections most of the magnetic field will pass through the item and not grip anything. The pull on thin sections will therefore be much less than on thicker items.
These magnets are approximately 10 times stronger than traditional ‘red’ magnets.
没有评论:
发表评论