2018年8月31日星期五

Rod Permanent Ceramic Cylinder Magnets

Rod Permanent Ceramic Cylinder Magnets - These magnets are all new, directly from the manufacturer, however, they have been cut from a larger block and it is not unusual for the edges to have chips and nibbles or for there to be patches of discolouration. This does not affect the either the power or performance of the magnets
Magnetised axially through the thickness so that one 100x25mm face is north and the other is south
+/-0.1mm manufacturers cutting tolerance
Anisotropic Strontium ferrite ceramic 8 material. These craft magnets are stronger than your average craft magnet. These magnets are suitable for the following applications:
images
moulding clay
wood
plastic


and other craft and educational projects.
Strong Large Rod Ferrite Magnets greatly concentrate magnetic fields and radio waves, especially useful at lower frequency. They are easy to use as a directional antenna: just wind turns of wire on the rod and then connect a variable capacitor to tune it up to the desired receive frequency.
Ferrite rods are made up of special ceramic magnetic materials wherein the magnetic molecules (domains) have the ability to align freely with external magnetic fields. The result is a powerful gain in magnetic strength (amplification) of the radio signal but without adding any electronic “hiss” noise. Its almost like a pre-amplifier but requires no external power except for the incoming signals.
These 2.75 inch x 0.380 inch diameter 2300u ferrite rods are great for use at frequencies from DC through 200 KHz.
Antennas: Transmits and Receive,
Electromagnet cores,
Transformer cores,
Audio chokes,
RF chokes,
Metal detectors,
Electromagnetic sensors,
Custom inductors,
Speaker crossover coils,
Experimental motors and more.

China Factory Wholesales Ferrite Rods

China Factory Wholesales Ferrite Rods

China Factory Wholesales Ferrite Rods, Cheap Strong Cylinder Ceramic Magnets, Hard Ferrite Rod Permanent Magnets, Sintered Ferrite Ceramic Cylindrical Magnets, Industrial Bar Rod Magnets, Strontium Ferrite Magnets, Anisotropic or Isotropic Ferrite Magnets China Supplier China Factory Wholesales Ferrite Rods Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the […]

Cylinder Ceramic Magnets

Cheap Strong Cylinder Ceramic Magnets

Cheap Strong Cylinder Ceramic Magnets, Hard Ferrite Rod Permanent Magnets, Sintered Ferrite Ceramic Cylindrical Magnets, Industrial Bar Rod Magnets, Strontium Ferrite Rod Magnets, Anisotropic or Isotropic Ferrite Magnets China Factory Cheap Strong Cylinder Ceramic Magnets Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the request of clients Specification: […]

Hard Ferrite Rod Permanent Magnets

Hard Ferrite Rod Permanent Magnets

Hard Ferrite Rod Permanent Magnets, Sintered Ferrite Ceramic Cylindrical Magnets, Industrial Ceramic Bar Rod Magnets, Strontium Ferrite Rod Permanent Magnets, Ceramic Cylinder Magnets, Anisotropic or Isotropic Ferrite Magnets China Factory Hard Ferrite Rod Permanent Magnets Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the request of clients Specification: 1.Low cost, […]

Sintered Ferrite Ceramic Cylindrical Magnets

Sintered Ferrite Ceramic Cylindrical Magnets

Sintered Ferrite Ceramic Cylindrical Magnets, Hard Sintered Ferrite Rod Magnets, Industrial Ceramic Bar Rod Magnets, Strontium Ferrite Rod Permanent Magnets, Ceramic Cylinder Magnets, Anisotropic or Isotropic Ferrite Magnets China Factory Sintered Ferrite Ceramic Cylindrical Magnets Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the request of clients Specification: 1.Low cost, […]

2018年8月28日星期二

Ferrite Cores

Ferrite Core, EMI soft ferrite core, SMD ferrite core, MnZn ferrite core, Various Styles Ferrite Cores for TRANSFORMER and INDUCTOR

Ferrite Core – Ferrites that are used in transformer or electromagnetic cores contain nickel, zinc, and/or manganese compounds. They have a low coercivity and are called soft ferrites. The low coercivity means the material’s magnetization can easily reverse direction without dissipating much energy (hysteresis losses), while the material’s high resistivity prevents eddy currents in the core, another source of energy loss. Because of their comparatively low losses at high frequencies, they are extensively used in the cores of RF transformers and inductors in applications such as switched-mode power supplies and loopstick antennas used in AM radios. The most common soft ferrites are: MnZn ferrite (Manganese-zinc ferrite). MnZn have higher permeability and saturation induction than NiZn. NiZn ferrite (Nickel-zinc ferrite). NiZn ferrites exhibit higher resistivity than MnZn, and are therefore more suitable for frequencies above 1 MHz. For applications below 5 MHz, MnZn ferrites are used; above that, NiZn is the usual choice. The exception is with common mode inductors, where the threshold of choice is at 70 MHz.
 
 
 
EMI Ferrite CoreMnZn Ferrite CoreMagnetic Powder CoreIron Powder Core
 
SMD Ferrite CoreAmorphous Core 
HSMAG Ferrite Cores – soft ferrite cores are an oxide made from Iron (Fe), Manganese (Mn), and Zinc (Zn) which are commonly referred to as manganese zinc ferrites. They have a low coercivity and are also known as soft magnetic ferrites. Because of their comparatively low losses at high frequencies, they are extensively used in switched-mode power supply (SMPS) and radio frequency (RF) transformers and inductors. Ferrite cores for the high frequency power supply and high quality communication markets are produced in a variety of shapes and sizes for inductors, pulse transformers, high frequency transformers, and noise filters. Notable characteristics of Magnetics ferrite materials are high permeability, good temperature properties, and low disaccommodation. Magnetics offers ten materials. The materials range in permeability from 900µ to 15,000µ and are available in a variety of geometries including toroids, shapes and pot cores. Hardware accessories such as bobbins, printed circuit bobbins, clamps, mounts and headers are also available. Ferrite materials summary for all Magnetics power and high permeability ferrite materials. See individual material curves: Inductors and Power Transformers – L (900µ) , R (2,300µ) , P (2,500µ) , F (3,000µ) , T (3,000µ) EMI/RFI Filters and Broadband Transformers – J (5,000µ) , W (10,000µ) , M (15,000µ) Linear Filters and Sensors – C (900µ) , E (2,000µ) , V (2,300µ)

T Type Inductor Toroidal Ferrite Core

T Type Inductor Toroidal Ferrite Core

T Type Inductor Toroidal Ferrite Core, Ferrite Ring Core, T toroidal ring Mnzn ferrite core, T Ring Form TYPE Soft magnetic Ferrite Inductance Magnetic Core, Ferroxcube T type Large Ferrite Toroid core China Supplier Mode: T Type Inductor Toroidal Ferrite Core (T Type MnZn Soft Ferrite Core) Material: MnZn.(Manganese,Zinc) Application:  Line Filter,choke coil, light driver […]

EE Ferrite Core

EE Ferrite Core

EE Ferrite Core, EE Type Transformer Soft Ferrite Core, MnZn EE Type Transformer Ferrite Core With Pc40 GradE, Big Ui Transformer core EE type ferrite core China Supplier Mode: EE Ferrite Core (EE Type MnZn Soft Ferrite Core) Material: MnZn.(Manganese,Zinc) Application:  Line Filter,choke coil, light driver transformer. Initial Permeability: Initial permeability, Ui :2000-15000,include power and […]

EC Type Transformer Soft Ferrite Core

EC Type Transformer Soft Ferrite Core

EC Type Transformer Soft Ferrite Core, EC Ferrite Core, EC/EER/ETD MnZn Ferrite Core For Transformer, PC40 EC/EER/ETD Ferrite Core For Transformer China Supplier Mode: EC Type Transformer Soft Ferrite Core (EC Type MnZn Soft Ferrite Core) Material: MnZn.(Manganese,Zinc) Application:  Line Filter,choke coil, light driver transformer. Initial Permeability: Initial permeability, Ui :2000-15000,include power and high permeability […]

PQ Type MnZn Transformer Core

PQ Type MnZn Transformer Core

PQ Type MnZn Transformer Core, Pq MnZn Soft Ferrite Core, Pq Type MnZn Ferrite Core for Transformer, Pq Type MnZn Ferrite Core Suitable for High Frequency Transformers and Chokes, PQ MnZn Core China Supplier Mode: PQ Type MnZn Transformer Core (PQ Type MnZn Soft Ferrite Core) Material: MnZn.(Manganese,Zinc) Application:  Line Filter,choke coil, light driver transformer. […]

2018年8月27日星期一

China Factory Wholesales Ferrite Rods

China Factory Wholesales Ferrite Rods Features:
Part No.: HS-FMC
Material: Ferrite / Ceramic
Shape: Rod , Cylinder, Round Bar
As the request of clients


Specification:
1.Low cost, High working temperature with Good corrosion resistance
2.Grades:Y10T,Y20,Y25,Y30,Y30BH,Y35(China standard);C1,C5,C8,C11(U.S.A. Standard) HF8/22- HF24/3(Europe standard)
3.Products manufactured according to ISO9001 quality system;
4.Coating: No
5.Application: Speaker magnets, DC brushless motors,Separators (separate ferrous material from non-ferrous)medical equipment, toys, decorative magnets
6 Delivery: By sea, By air, By Express, various ways can be selected. We also cooperate with famous express companies like DHL, FedEx, EMS, TNT, UPS and so on. Our lead time is always quicker than average.
These magnets are all new, directly from the manufacturer, however, they have been cut from a larger block and it is not unusual for the edges to have chips and nibbles or for there to be patches of discolouration. This does not affect the either the power or performance of the magnets
Magnetised axially through the thickness so that one 100x25mm face is north and the other is south
+/-0.1mm manufacturers cutting tolerance
Anisotropic Strontium ferrite ceramic 8 material. These craft magnets are stronger than your average craft magnet. These magnets are suitable for the following applications:
images
moulding clay
wood
plastic
and other craft and educational projects.

Super Strong Ferrite Arc Magnets

Super Strong Ferrite Arc Magnets

Super Strong Ferrite Arc Magnets, Automotive Motor Permanent Ferrite Segments, Sintered Ferrite Arcs, Segment shape Ferrite Ceramic Magnets for motor and rotor, Segment Hard Ferrite Magnet, Ferritemagnet China Supplier Super Strong Ferrite Arc Magnets Features: Part No.: HS-FAM Material: Ferrite / Ceramic Shape: ARC, SEGMENT As the request of clients Specification: 1.Low cost, High working […]

Strong Ferrite Segments

Strong Permanent Magnet Ferrite Segments

Strong Permanent Magnet Ferrite Segments, Wholesales Ferrite Arcs, Segment shape Ferrite Ceramic Magnets for DC motor and Wind Power Turbine China Supplier Strong Permanent Magnet Ferrite Segments Features: Part No.: HS-FAM Material: Ferrite / Ceramic Shape: ARC, SEGMENT As the request of clients Specification: 1.Low cost, High working temperature with Good corrosion resistance 2.Grades:Y10T,Y20,Y25,Y30,Y30BH,Y35(China standard);C1,C5,C8,C11(U.S.A. Standard) […]

Permanent Magnet Ferrite Rod Bar

Permanent Magnet Ferrite Rod Bar

Permanent Magnet Ferrite Rod Bar, Wholesales Ferrite Rods, Ferrite Rod Bar Permanent Magnets For Radio Antennas Balun, FERRITE ROD AERIAL / ANTENNA BAR, BARS FERRITE FRAME ANTENNA RADIO China Supplier Permanent Magnet Ferrite Rod Bar  Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the request of clients Specification: […]

Powerful Cylindrical Ferrite Magnets

Powerful Cylindrical Ferrite Magnets

Powerful Cylindrical Ferrite Magnets, Wholesales Ferrite Rods, Strong Cylinder Ceramic Magnets, Hard Ferrite Rod Permanent Magnets, Sintered  Ceramic Cylindrical Magnets, Industrial Bar Rod Magnets, Strontium Anisotropic or Isotropic Ferrite Magnets China Supplier Powerful Cylindrical Ferrite Magnets Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the request of clients […]

2018年8月25日星期六

Strong Cylinder Ceramic Magnets

Strong Cylinder Ceramic Magnets were developed in the 60’s and today comprise 75% of world magnetic consumption. Despite their relatively low magnetic values, they are the most popular magnet on the market due to ready availability and relatively low cost.






The raw material from which ferrite magnets are produced is Strontium Ferrite powder (mainly ScO.6Fe203) which is formed in a press while subjected to an electric field. This process allows the direction of the magnetic field to be determined during the production of the magnet.
Ferrite magnets main qualities:
ferriteHigh coercivity (= high resistance of the magnet to demagnetization).
Highly stability under difficult environment conditions with no need for a coating to protect the magnet.
High resistance to oxidation.
Durability – the magnet is stable and constant.
Ferrite magnets popular uses:
automotive industry, electric motors (DC, brushless and others), magnetic separators (mainly plates), home appliances and more.

Magnetised axially through the thickness so that one 100x25mm face is north and the other is south
+/-0.1mm manufacturers cutting tolerance
Anisotropic Strontium ferrite ceramic 8 material. These craft magnets are stronger than your average craft magnet. These magnets are suitable for the following applications:
images
moulding clay
wood
plastic
and other craft and educational projects.

Strong Large Rod Ferrite Magnets

Strong Large Rod Ferrite Magnets

Strong Large Rod Ferrite Magnets, Hard Sintered Ferrite Round Bar Magnets, Industrial Ceramic Rod Magnets, Strontium Ferrite Rod Permanent Magnets, Ceramic Cylindrical Magnets, Anisotropic or Isotropic Ferrite Magnets China Factory Strong Large Rod Ferrite Magnets Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the request of clients Specification: 1.Low cost, […]

Hard Sintered Ferrite Round Bar Magnets

Hard Sintered Ferrite Round Bar Magnets

Hard Sintered Ferrite Round Bar Magnets, Industrial Ceramic Rod Magnets, Rod Strontium Ferrite Permanent Magnets, Strong C1 C5 C8 Ceramic Cylindrical Magnets, Anisotropic or Isotropic Ferrite Magnets China Factory Hard Sintered Ferrite Round Bar Magnets Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the request of clients Specification: 1.Low […]

Industrial Ceramic Rod Magnets

Industrial Ceramic Rod Magnets

Industrial Ceramic Rod Magnets, Rod Strontium Ferrite Permanent Magnets, Strong Round Bar Hard Sintered Ferrite Permanent Magnets, C1 C5 C8 Ceramic Cylindrical Magnets, Anisotropic or Isotropic Ferrite Magnets China Factory Industrial Ceramic Rod Magnets Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the request of clients Specification: 1.Low cost, […]


2018年8月23日星期四

Anisotropic or Isotropic Ferrite Magnets China Supplier

China Factory Wholesales Ferrite Rods, Cheap Strong Cylinder Ceramic Magnets, Hard Ferrite Rod Permanent Magnets, Sintered Ferrite Ceramic Cylindrical Magnets, Industrial Bar Rod Magnets, Strontium Ferrite Magnets, Anisotropic or Isotropic Ferrite Magnets China Supplier


China Factory Wholesales Ferrite Rods Features:
Part No.: HS-FMC
Material: Ferrite / Ceramic
Shape: Rod , Cylinder, Round Bar
As the request of clients
Specification:
1.Low cost, High working temperature with Good corrosion resistance
2.Grades:Y10T,Y20,Y25,Y30,Y30BH,Y35(China standard);C1,C5,C8,C11(U.S.A. Standard) HF8/22- HF24/3(Europe standard)
3.Products manufactured according to ISO9001 quality system;
4.Coating: No
5.Application: Speaker magnets, DC brushless motors,Separators (separate ferrous material from non-ferrous)medical equipment, toys, decorative magnets
6 Delivery: By sea, By air, By Express, various ways can be selected. We also cooperate with famous express companies like DHL, FedEx, EMS, TNT, UPS and so on. Our lead time is always quicker than average.

2018年8月21日星期二

Ferrite Rods

Ferrite Rods were developed in the 60’s and today comprise 75% of world magnetic consumption. Despite their relatively low magnetic values, they are the most popular magnet on the market due to ready availability and relatively low cost.
The raw material from which ferrite magnets are produced is Strontium Ferrite powder (mainly ScO.6Fe203) which is formed in a press while subjected to an electric field. This process allows the direction of the magnetic field to be determined during the production of the magnet.



Ferrite magnets main qualities:
ferrite High coercivity (= high resistance of the magnet to demagnetization).
Highly stability under difficult environment conditions with no need for a coating to protect the magnet.
High resistance to oxidation.
Durability – the magnet is stable and constant.
Ferrite magnets popular uses:
automotive industry, electric motors (DC, brushless and others), magnetic separators (mainly plates), home appliances and more.



Stock Neodymium Magnets Ring

Stock Neodymium Magnets Ring

Stock Neodymium Magnets Ring Ø18 x Ø10 x 4 mm N40, Axial Neodymium Ring Craft Magnet, Powerful Rare Earth Permanent Neo Ring Magnet, Sintered Neodymium Iron Boron (NdFeB) magnet, Buy Super Strong Bulk NdFeB Ring Neo Magnets China Supplier & Factory Stock Neodymium Magnets Ring Ø18 x Ø10 x 4 mm N40 Feature: Material Neodymium […]

Bulk Wholesale Ring Permanent Magnets

Bulk Wholesale Ring Permanent Magnets

Bulk Wholesale Ring Permanent Magnets Ø16 x Ø12.5 x 8 mm N42, Axial Neodymium Ring Craft Magnet, Powerful Rare Earth Permanent Neo Ring Magnet, Sintered Neodymium Iron Boron (NdFeB) magnet, Buy Super Strong Bulk NdFeB Ring Neo Magnets China Supplier & Factory Bulk Wholesale Ring Permanent Magnets Ø16 x Ø12.5 x 8 mm N42 Feature: […]

Sintered NdFeB Rings

Sintered NdFeB Rings

Sintered NdFeB Rings Ø15 x Ø10 x 2 mm N40, Axial Neodymium Ring Craft Magnet, Powerful Rare Earth Permanent Neo Ring Magnet, Sintered Neodymium Iron Boron (NdFeB) magnet, Buy Super Strong Bulk NdFeB Ring Neo Magnets China Supplier & Factory Sintered NdFeB Rings Ø15 x Ø10 x 2 mm N40 Feature: Material Neodymium Plating  Nickel […]

2018年8月19日星期日

Hard Ferrite Rod Permanent Magnets

Powerful Cylindrical Ferrite Magnets, Wholesales Ferrite Rods, Strong Cylinder Ceramic Magnets, Hard Ferrite Rod Permanent Magnets, Sintered  Ceramic Cylindrical Magnets, Industrial Bar Rod Magnets, Strontium Anisotropic or Isotropic Ferrite Magnets China Supplier


These magnets are all new, directly from the manufacturer, however, they have been cut from a larger block and it is not unusual for the edges to have chips and nibbles or for there to be patches of discolouration. This does not affect the either the power or performance of the magnets
Magnetised axially through the thickness so that one 100x25mm face is north and the other is south
+/-0.1mm manufacturers cutting tolerance
Anisotropic Strontium ferrite ceramic 8 material. These craft magnets are stronger than your average craft magnet. These magnets are suitable for the following applications:
images
moulding clay
wood
plastic
and other craft and educational projects.

Cylinder Ceramic Magnets

Cheap Strong Cylinder Ceramic Magnets

Cheap Strong Cylinder Ceramic Magnets, Hard Ferrite Rod Permanent Magnets, Sintered Ferrite Ceramic Cylindrical Magnets, Industrial Bar Rod Magnets, Strontium Ferrite Rod Magnets, Anisotropic or Isotropic Ferrite Magnets China Factory Cheap Strong Cylinder Ceramic Magnets Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the request of clients Specification: […]
 
Hard Ferrite Rod Permanent Magnets

Hard Ferrite Rod Permanent Magnets

Hard Ferrite Rod Permanent Magnets, Sintered Ferrite Ceramic Cylindrical Magnets, Industrial Ceramic Bar Rod Magnets, Strontium Ferrite Rod Permanent Magnets, Ceramic Cylinder Magnets, Anisotropic or Isotropic Ferrite Magnets China Factory Hard Ferrite Rod Permanent Magnets Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the request of clients Specification: 1.Low cost, […]
 
Sintered Ferrite Ceramic Cylindrical Magnets

Sintered Ferrite Ceramic Cylindrical Magnets

Sintered Ferrite Ceramic Cylindrical Magnets, Hard Sintered Ferrite Rod Magnets, Industrial Ceramic Bar Rod Magnets, Strontium Ferrite Rod Permanent Magnets, Ceramic Cylinder Magnets, Anisotropic or Isotropic Ferrite Magnets China Factory Sintered Ferrite Ceramic Cylindrical Magnets Features: Part No.: HS-FMC Material: Ferrite / Ceramic Shape: Rod , Cylinder, Round Bar As the request of clients Specification: 1.Low cost, […]