Rotor Multipole Radial Magnet Ring, Rotor Radial Multipole Magnetic Rings Assembly, Multi-pole Magnetized Magnets, Bonded Neodymium Radial Multipolar Ring, Bonding Multipole Radial Magnetic Rings,
Sensor Magnet China Manufacturer
G58A Radial Multipole Ring – 3 5/8″ – Multipolar Radial Ring Magnet Assembly
Part No. HSRMR-G58A
Four grades of magnetic materials
Cost effective design
High resistance to demagnetization
Operation from -40°C to 125°C
Tough environmental endurance
Very resistant to chipping
Pole Count Options 32, 36, 50, 64, 120
Magnetic Rings Assembly Instructions, radial multipole ring assembly, multipolar radial ring magnet
G58A Series Magnetic Rings Assembly Instructions
• Proper alignment of the target rotor is critical for optimal performance.
• A machined step on the motor shaft provides a quick and repeatable method for positioning the target rotor. Spacers or other fixturing should be
used if no mechanical locating features are on the shaft.
• A chamfered lead in on the shaft will aid in aligning the rotor.
• Prior to insertion, the motor shaft should be clean and free of any oils, lubricants, or solvents.
• Proper fixtures and support must be used to ensure the magnet is pressed on straight and aligned with the motor shaft.
• Opposite end of motor shaft should be supported to avoid undue stress on
motor bearings during the pressing operation.
• In applications with high torque or environmental extremes, a retaining compound can be used to enhance the strength of the press fit.
没有评论:
发表评论