2016年11月22日星期二

Magnet Machining Process

Magnet Machining Process – Magnets that have been through the sintering process are machined and plated. http://www.hsmagnets.com/blog/magnet-machining-process/
Machining
Due to shrinkage from the sintering process, required measurements are achieved by grinding the magnets with abrasives.
Diamond abrasives are used for this process because the magnet is very hard.

To best suit the environment in which they will be used, the magnets are subject to various surface treatments.
NdFeB magnets are generally susceptible to rust so they are surface treated with nickel or paint. SmCo magnets have a high resistance to corrosion so they are not usually plated.

surface-treatment-plating
Form / Visual Inspection
Magnets that have been machined and plated are measured and visually inspected. In addition, magnetic properties, corrosion and maximum energy are tested to specifications.

form-visual-inspection
Magnetization Assembly
Magnets that have been machined and plated are measured and visually inspected.
In addition, magnetic properties, corrosion and maximum energy are tested to specifications.

magnetization-assembly
Shipping Packaging
Magnets that have passed product testing are packaged and shipped. Flux leakage shields are utilized for air shipment when required. HSMAG’s magnetic products are shipped in Japan and to worldwide customer manufacturing locations.

shipping-packaging

没有评论:

发表评论